User Guide

MAX-MDL200 Multi-Disc Loader System

MDL200 Product Specifications

FIG. 2 MDL200 Multi Disc Loader

IEEE 1394 ports

Power cable connector

(rear)

Power button

Disc Loading Slot

(front)

(insert discs

here to load the

internal carousel).

front panel controls (see Note below)

When used with the laptop PC that comes with it (pre-configured with the BulkRipper

application), there is no need to use the front-panel controls on the MDL200. Instead,

use the controls provided in the BulkRipper application as described in this manual.

MDL200 (FG 2179-01) Specifications

Storage Capacity: 200 discs, 4.7 GB/disc

Power Requirements: • Voltage: 110 – 240V AC (autosensing)

• Frequency: 50/60 Hertz

• Consumption: 45 watts (peak), 35 watts (normal)

AC Current Draw (AMP): • .45A - Bootup/Power Cycle Peak

• .45A - Normal Usage Peak

Interface Specifications

(IEEE 1394):

• Bus interface IEEE-1394 compliant

• Data transfer rate 100, 200, and 400Mbps

• Three 6-pin IEEE-1394 ports

Number of Drives: Two DVD-ROM drives (both drives can transfer disc images

simultaneously)