User Guide

Using BulkRipper and the MDL200
16
MAX-MDL200 Multi-Disc Loader System
The Status column indicates the status of each disc:
 Identified: Disc was identified
 Error - Region Mismatch: The region code on the DVD does not match the region code
setting for the DVD-ROM drive (Drive 1 or Drive 2) being used by the MDL200.
 Please Identify - Use Multiple Match dialog.
 (blank): Empty Slot or unidentified disc.
 Disc or Network Error
Removing Discs From The MDL200
When you’re finished transferring all of the discs in the MDL200, remove them from the unit:
 To unload a single disc, right-click on the disc title and select Eject from the context
menu.
 To unload a selected range of discs, select Changer > Eject Range and specify the range
of discs you want to eject (in the Start Disc/End Disc fields).
 Alternatively you can use the Changer > Eject All command to eject all of the discs.
In any case, as each disc is ejected, it must be manually removed from the carousel on the front of
the MDL200. You have 10 seconds to remove the disc before it is pulled back into the unit and the
eject command is cancelled.
Clearing Disc Information From the Disc/Slot Window
By default, all disc information is displayed in the Disc/Slot Window until it is manually cleared.
Select File > Reset All to reset (clear) all of the disc information in the Disc/Slot Window.
Refer to the Changing the Region Code Settings on the MDL200 section on page 18
for details.
The Reset All command also stops the transfer and/or identify processes.