Specifications

Archive Service
67
Vision
2
Operation/Reference Guide
Setting Up a NAS Archive
A NAS archive requires a Vision
2
server running release 8.2.4327 or greater.
To configure the NAS server:
1. Create a folder on the NAS that you want to use to store your archives contents, for example:
ArchiveNAS, so that the UNC path to this folder is \\NASservername\ArchiveNAS.
2. Create the user “v2system” with password “Vision2” and give read and write permissions for the
ArchiveNAS folder.
To configure the Vision
2
server:
1. In Windows, select Start > Control Panel > Administrative Tools > Computer Management > Local
Users and Groups.
2. In the Computer Management dialog, select Users, and right-click and select New User to open the New
User dialog (FIG. 66). Create a new user named “v2system” with the password “Vision2”.
3. Check the User cannot change password and Password never expires check boxes. Click Create and
then click Close.
4. In the Computer Management dialog, right-click the “v2system” user and select Properties.
5. In the Properties dialog, select the Member of tab, and click Add.
6. In the Select Groups dialog, click Advanced
7. In the next dialog, click Find Now, and select Administrators from the list that appears. Click OK to
close this dialog, and click OK again to close the Select Groups dialog.
FIG. 66 New User dialog