Specifications

Installation
14
Vision
2
Operation/Reference Guide
After the set-top box reboots, it accesses the Vision
2
master server you indicated and downloads the latest
Vision
2
menus.
You can access the Vision
2
menus by pressing the Menu button on the remote control. The Vision
2
Main Menu
(FIG. 18) contains two options: Live TV Feeds and Video on Demand.The following sections describe each
menu in detail.
Live TV Feed
The Live TV Feeds menu (FIG. 19) displays a listing of all Live Channels available in your Vision2 system.
Use the remote control to scroll through the channels and press OK on the remote control to select and view a
channel. See the Using the Remote Control section on page 13 for more information on using the remote.
Video on Demand
The Video on Demand menu displays a listing of all available video archives (FIG. 20).
Use the remote control to scroll through the list of archives and press OK to enter an archive. Within an
archive you will see a number of categories, use the cursor keys on the remote to navigate to the correct
category. click OK to navigate into the category. Use the same method to select a video/audio file within a
folder. Select a Video and click OK to view the video thumbnail fullscreen along with any metadata associated
with the video, see FIG. 22. Click OK again to play the video. See the Using the Remote Control section on
page 13 for more information. FIG. 23 displays an example of video on demand programming. While viewing
video on demand programming, you can use the remote control to pause or stop the video stream. If you press
OK on the remote control while a video is playing then a seek bar appears. Press Left or Right on the control
while the seek bar is displayed to move to the correct location in the video and then press OK again to resume
Subtitles are only supported on DTV streams.
If you are using an STB-04 set-top box and you receive a "failed to load webpage"
error, select the OK button on the remote and, using the remote, power the set-top
box off and on again. Afterward, the Vision
2
main menu loads.
You must ensure the set top box has Opera version 10 installed, Opera 11 is not
supported
FIG. 18 Vision
2
Main Menu