Manualshelf

Specifications

ManualsBrandsAMX ManualsReceivers and AmplifiersMAX-CSE
11121314151617181920
Installation
9
Vision
2
Operation/Reference Guide
Installation
This section provides instructions on how to install the different Vision
2
accessories.
Installing Master Servers Accessories
You can install optional accessories into your Master server for redundant power or for connection to an
Archive server.
Installing a Secondary Power Supply
The V2-POWER-1100 (FG3106-PS) is a secondary power supply that you can use to add redundant power to
FG3106-XX Vision
2
Master Servers. Master servers ship with a single 1100W power supply. You can add one
additional V2-POWER-1100 to the server to provide power supply redundancy.
Follow these steps to install a secondary power supply.
1. Remove the metal cover from the power supply expansion slot (see FIG. 8).
2. Slide the secondary power supply into the slot until the orange tab beside the power connector clicks into
place.
Installing Expansion Storage
The following steps show you how to add an additional 24TB of Disk storage to an existing archive server:
1. Connect an SAS cable to the IN port on the rear of the V2-STORAGE-2400 Expansion Storage device
(FIG. 10).
2. Connect the other end of the cable to the first SAS port on the rear of the Master server.
FIG. 7 V2-POWER-1100 Power Supply
The V2-POWER-1100 power supply is only compatible with the FG3106-XX Vision
2
Master servers.
FIG. 8 Master server - rear panel