Specifications

Wiring and Device Connections
7
Vision
2
Operation/Reference Guide
Wiring and Device Connections
V2-Master Server Rear Panel Connections
This section details the ports and connectors on the rear panel of the Vision
2
Master server.
The two flex drives at the rear of the V2-Master server are fitted with 146GB 15K SAS 2.5in Hot-Plug Drives
configured as Raid1 for the OS (Microsoft Windows Server 2008 Standard)
LAN (RJ-45) Port
FIG. 4 describes the blink activity for the LAN 10/100/1000 Base-T RJ-45 connector and cable.
The following table lists the pinouts, signals, and pairing associated with the LAN connector.
FIG. 2 Vision
2
Master server rear panel
Output port
LAN ports
Power connector
FIG. 3 LAN (RJ-45) Port
FIG. 4 LAN connector / LEDs
ETHERNET
A L
A - Activity LED (yellow)
lights when receiving or
transmitting LAN
data packets
L - Link LED (green) lights when
the LAN cables are connected
and terminated correctly.
Vision
2
uses typical Cat5/5e/6 cabling for RJ-45 connections.
LAN RJ-45 Pinouts and Signals
Pin Signals Connections Pairing Color
1 TX + 1 --------- 1 1 --------- 2 Orange-White
2 TX - 2 --------- 2 Orange
3 RX + 3 --------- 3 3 --------- 6 Green-White
4 no connection 4 --------- 4 Blue
5 no connection 5 --------- 5 4 --------- 5 Blue-White