Specifications

Overview
5
Vision
2
Operation/Reference Guide
Vision2 Network Requirements
Network Switch Requirements
Vision
2
requires a Gigabit layer 2/3 network switch with IGMP Snooping/Querier support. Your network
switch should have the following requirements:
Using Vision2 without a DNS Server
It is recommended that you use Vision
2
with a DNS Server, if you do not have a DNS Server then you will
need to edit the hosts file on each Vision
2
server and add the names and IP addresses of all your Vision
2
servers. The hosts file is located in the folder C:\windows\system32\drivers\etc. FIG. 1 shows a hosts file for a
setup with one master server called V2MASTER with IP address 192.168.20.110 and one Digital TV
Appliance called V2DVBGATEWAY with IP address 192.168.20.111
Audio: • Analog stereo audio out
• Stereo and Dolby 5.1 surround via S/PDIF and HDMI
• Dolby Digital+ pass through to external decoder
Operating Environment: • Operating Temperature: 0º to 40º C (32º to 104º F)
• Storage Relative Humidity: 5% to 95% (non-condensing)
Dimensions (HWD): 1 9/16" (4cm) H x 5 1/2" (14cm) W x 4 1/2" (11.4cm) D
Weight: 0.70 lbs (0.32 kg)
Included Accessories: • 1 Amino Universal Remote Control
Network Switch Requirements
Physical Interfaces: RJ-45 connectors for 10Base-T, 100Base-TX, 1000Base-T with 8, 16, 24, or 48
ports.
Layer 2 Services: • IGMP Snooping V1 or V2 (Not router dependant for operation)
• IGMP Querier
• Layer 2/3 switching
• Spanning Tree Protocol (STP)
Security: • QoS
• Storm Control Broadcast and Multicast
Performance Specifications: Jumbo frame support
Switching Capacity: Non Blocking 32Gbps (16Port) - 140Gbps (48Port)
Forward Rate: 24Mpps (16Port) - 96Mpps (48Port)
Internet Protocol: IPv4 or IPv6
Optional: • VLAN support
• Web User Interface