Product specifications

NetLinx Programming
87
MAX-CSE/MAX-CSD10 Operation/Reference Guide
MAX-CSE Streaming Send_Commands (Cont.)
Command Description
SET VSOURCE
Set the source type needed
for the video stream.
Sets the current video source type for the outgoing (encoded) video stream.
Changing this source type redirects the video detection on the MAX unit’s rear
video ports.
Note: If both signal types are detected, the unit defaults to using the
Composite signal type unless otherwise specified via this command.
Syntax:
SEND_COMMAND <DEV>,"'SET VSOURCE <source>'"
Variable:
source = SVID (S-Video) or COMP (Composite).
Example:
SEND_COMMAND ENCODER,"'SET VSOURCE SVID'"
Switches the encoded video stream to take video from the S-Video port.
STOP
Stop transmission of both the
audio and video stream.
A stream can also be halted via the browser-based UI pages.
Syntax:
SEND_COMMAND <DEV>,"'STOP'"
Example:
SEND_COMMAND ENCODER,"'STOP'"