Product specifications

Displaying Stream Content

MAX-CSE/MAX-CSD10 Operation/Reference Guide

Configuring the MAX-CSE Audio/Video Inputs

Complete the MAX-CSE connection and wiring procedures outlined within the Wiring the MAX-

CSE Connectors and Cables section on page 12.

2. Access the A/V Setup page (FIG. 43) by clicking the Audio/Video button in the Navigation Bar.

This page provides the user with the ability to select the source of the incoming video signal (from

either the rear Composite or S-Video port), the format of the incoming video (NTSC/PAL), and the

gain given to the incoming audio signal.

3. From within the Video section of this page, check off the appropriate Video In and Video Port radio

boxes which correspond to both the type of video signal being used and its associated format.

For the purpose of these procedures, we’ve chosen to feed an NTSC signal into the rear

Composite video connector. As a result, a user should "check-off"/select both the Composite

and NTSC radio boxes.

4. If you are feeding a microphone audio signal into the rear MAX-CSE microphone connector, you

could use the Microphone Gain field to enter an audio level (0 - 99) associated with the gain used by

the rear microphone input.

5. Click the Apply button to save the encoding profiles to the MAX-CSE.

FIG. 43 A/V Setup page

At any time, the user can choose to mute the incoming microphone signal by either

toggling the state of the Microphone icon located at the top of the page or entering a

value of zero into the Mic Gain field.