User manual
Internet: http//www.comelit.it E-mail: info@comelit.it
24020 Rovetta S.Lorenzo
Via Don Arrigoni, 5
Bergamo – Italia
Tel.+39 0346 750011 Fax. +39 0346 71436
49
4. PORT 1 DEVICE TYPE: This switch defines which device the port 1 (RS485) is connecting.
The default is KEYB (REMOTE KEYBOARD)
Control Keyboard SINGLE mode: PELCO-P
Control Keyboard Matrix mode: KEYB
5. PORT 2 DEVICE TYPE: This switch defines which device the port 2 (RS485) is connecting.
The default is LILIN (LILIN’S FAST DOME). Control Keyboard SINGLE and MATRIX mode,
do not have to care.
6. PORT CROSS LINK: This switch is setting whether both the PORT 1 & PORT 2 are cross
connected? “ON”: Both PORT 1 & PORT 2 is connected. The Multiplex can use PORT 1 to
connect one Remote Keyboard and one kind of Fast Dome via PORT 2 bus, and it can be
controlled by Remote Keyboard, but it cannot connect any P/T/Z Dome in the PORT 1 bus.
In this architecture you can install multiple keyboard via PORT 1 bus. “OFF”: Both PORT 1 &
PORT 2 are not cross connected. The multiplex can use PORT 1 to connect one Remote
Keyboard and one kind of P/T/Z Dome via PORT 1 bus, and both the MUX and P/T/Z Dome
can be controlled by the Remote keyboard, on the same bus, but not the fast Dome at the
other side. In This architecture, the multiplex can also install another keyboard and another
kind of fast Dome via PORT 2 bus, and it can be controlled by Keyboard on the same bus.
Control Keyboard SINGLE and MATRIX mode, always “OFF”.
CAM: 001 MUX:000
DVR: 000 MON:000
NOT YET LOGIN
>
CAM: 001 MUX:000
DVR: 000 MON:000
USER LOGIN
>
CAM: 001 MUX:000
DVR: 000 MON:000
USER LOGOUT
>
Matrix Mode:
NOT YET LOGIN
User not log in yet
No this function of Single mode.
Matrix Mode:
USER LOGIN
User has log in
No this function of Single mode.
Matrix Mode:
USER LOGOUT
User log out
No this function of Single mode.
Additional: Control Command Display
Back to MENU