User manual

Internet: http//www.comelit.it E-mail: [e-mail]
24020 Rovetta S.Lorenzo
Via Don Arrigoni, 5
Bergamo – Italia
Tel.[phone] Fax. [phone]
48
4. 4 CH DVR RS485 is +/- pin.
All device control function please read the product manual book. All remote function must set
correct, otherwise the device cannot control by control keyboard.
Normally the P/T/Z dome does not include the RS485 (RJ11 female), but it shows out the
pin define. User read the product manual book to check the pin define (T+ / T-), and then
make the RS-485 (RJ11 female).
 Press MENU key to enter main menu, and then choose remote setup page.
1. REMOTE BAUD RATE: 2400 / 4800 / 9600 / 19200
2. MACHINE ADDRESS ID: Use the UP/DOWN/ENTER keys to set the Address ID of this
machine. In the whole system architecture, the value is range from 01 to 16.
3. MACHINE NAME: There are 5 character spaces to hold the name.
Additional: P/T/Z Dome, Multiplexer, DVR remote function setup
P/T/Z DOME
Multiplexer
MENU
SET TIME-OF-DATE Y00:M00:D00
H00:m00:s00
LANGUAGE SELECT ENGLISH
CAMERA SETUP PAGE
ALARM SETUP PAGE
RECORD SETUP PAGE
EVENT SETUP PAGE
MOTION SETUP PAGE
REMOTE SETUP PAGE
SYSTEM SETUP PAGE
SAVE SETTINGS
REMOTE SETUP
REMOTE BAUD RATE 9600
MACHINE ADDRESS ID 01
MACHINE NAME
MUX_ _
PORT 1 DEVICE TYPE KEYB
PORT 2 DEVICE TYPE LILIN
PORT CROSS LINK ON
Back to MENU