Specifications

Interactivity
88
AMX InspiredSignage XPress Programming Guide
IS-SPX-1000 configuration
In order to run interactive projects, the IS-SPX-1000 must be configured to run them. This requires access to
the player’s Browser-Based Configuration Pages.
To start, events must be enabled on the IS-SPX-1000. To do this:
1. From the Browser-Based Configuration Pages, select Display Settings.
2. In the Display Settings page, select the Interactivity tab (FIG. 95).
3. If the Enable events checkbox is not selected, select it now.
4. Select your Maximum rendering latency setting. This ranges from 250 milliseconds to 1500 milliseconds.
When using audio, use at least a latency of 250 milliseconds. 500 milliseconds is recommended.
5. If you wish to lower your latency levels upon reception of interactivity events, click the Reduce latency to
60ms when events are received checkbox. When using audio in a project, do NOT click this checkbox.
For more information on the Browser-Based Configuration Pages, please refer to the
IS-SPX-1000 Operation Reference Guide, available at www.amx.com.
FIG. 95 Interactivity Settings