Specifications

Appendix A - Serial Control
111
AMX InspiredSignage XPress Programming Guide
8. Right-click the <auxCMD> header and select Add attribute. Name the attribute “param1” and press
Enter to save it (FIG. 115).
9. For PowerOn.svg, click on command and then select the attribute to the right (currently “PowerOn”).
Change the command to power and press Enter to save it.
10. Click on target and change it to monitor.
11. Click on param1 and enter On.
12. Repeat steps 6 through 11 for PowerOff.svg. In this case, though, set param1 to “Off”.
Creating and updating a new calendar file
The final step involves setting the two new svg files so they can be accessed by the project. To do this:
1. If you have not already done this, copy the PowerOn.svg and PowerOff.svg files into your project.
2. Right-click the workspace area of your project and select New Schedule.
3. Open the new calendar file named new.ics.
FIG. 115 XML Tree with new attribute param1