Specifications

Using the IRIS
6
IRIS Infrared/Serial Data Capture Unit
Cables and Adapters
Depending on your IREdit programming configuration, one or more cables may be required. Connectors
are shown from the wiring side. FIG. 1 shows a computer-to-Axcess Control System (DB-25 to DB-9)
wiring diagram; FIG. 2 shows a computer-to-Axcess Central Controller (DB-9-to-DB-9) wiring
diagram.
HC IR Functions
The following table lists the HC IR functions in standard order.
FIG. 1 Computer-to-Axcess Control System (DB-25 to DB-9) wiring diagram
FIG. 2 Computer-to-Axcess Control System (DB-25 to DB-9) wiring diagram
HC IR Functions - Standard Order
Function Description Function Description
1 Play > 22 Channel up or +
2 Stop [ ] 23 Channel down or -
3 Pause | | or still 24 Volume up or +
4 Ffwd >> (AMS/skip track/chapter) 25 Volume down or -
5 Rewind << (AMS/skip track/chapter) 26 Mute
6 Search fwd >>| (AMS/scan) 27 On (power typically)
7 Search rev |<< (AMS/scan) 28 Off (power typically)
8 Record 29 TV/Video or TV/VCR or TV/LDP
(one button source selection)
9 Power or on/off 30 TV
10 ’0’ or ’10’ 31 Video1, Line A, VCR1, VDP, or input +
11 ’1’ (channel digits or tracks for CD) 32 Video2, Line B, VCR2, or input -
12 ’2’ 33 Video3
13 ’3’ 34 RGB1 or Tape1
14 ’4’ 35 RGB2 or Tape2
15 ’5’ 36 CD
16 ’6’ 37 Tuner
17 ’7’ 38 Phono
18 ’8’ 39 Aux
25-pin PC
serial-port
connector
2
3
7
2
5
3
9-pin Axcess
Control System
or IRIS connector
9-pin PC serial-port
port connector
9-pin Axcess
Control System
or IRIS connector
2
5
3
5
3
2