User Guide

Basic Operations
35
I
REdit
Actuate IR Dialog
Select Tools > Actuate to open the Actuate IR Dialog.
 The connection status is indicated in the Device section is the connection status. Specify
Device, Port and System address information in the text fields in this section
The Channel section contains a scrolling list, select a channel to test.
The Toggle section manually actuates from OFF to ON.
 Click the Off button to turn on the corresponding LED at the master.
The Pulse section sets the actuate to pulse OFF and ON at a set interval.
 Click Pulse to cause the corresponding LED to flash.
 Pulse interval time field (range is 1 to 100 in tenths of a second).
Click the Close button to end the Actuate session.
Actuating An IR Function
You can select a downloaded IR function and then actuate it at the master to confirm a successful
download.
1. After you have downloaded the IR file to the master, select one of the functions to actuate.
2. Select Tools > Actuate. This will open the Actuate IR dialog.
3. Confirm all information listed in the Device section is correct.
 Device
 Port
FIG. 21 Actuating An IR Dialog