User Guide

Basic Operations

IREdit

Transport Connection Option Settings

When setting TCP/IP Settings you need to:

Select Tools > Comm Settings..., select the TCP/IP as the Transport Connection option, and then

click Settings to access the TCP/IP Settings dialog.

Enter a valid target TCP/IP Address and IP Port assignment.

When setting Serial Port Settings you need to:

Select Tools > Comm Settings..., select the Serial Port as the Transport Connection option, and

then click Settings to access the Serial Port Settings dialog.

 Com Port - Click the down arrow to open a menu where you can choose between

available COM ports.

 Baud Rate - Click the down arrow to open a menu where you can choose the baud rate of

your COM port from the list (suggested setting = 38400).

This option is only available for NetLinx systems.

FIG. 18 TCP/IP Settings Dialog

The IP Port assignment defaults to 1319. You should not change the IP Port number.

FIG. 19 Serial Port Settings Dialog