User Guide

Basic Operations
23
I
REdit
Deleting An IR Property
1. Within the Properties window select Model Name.
2. Model Name provides a drop-down button, when selected will open the Model Manager
Dialog.
3. Within the Model Manager select the model line to be deleted.
4. Select Delete.
5. You will be prompted to confirm your selection. Click Yes .
6. Afterwards you are returned to Model Manager. Click OK.
Sending An IR File
Use the Send function to transfer the IR files to devices on the bus. This connection will be made by
whatever connection you have specified in Comm Settings.
1. With your IR file selected in the Navigator window, select Tools > Send, to open the Send IR
dialog.
2. Enter the address information for Device, Port and System.
FIG. 16 Send IR Dialog
In the Send IR dialog, under the Send section, be sure it reads Connected to
device.