User Guide
Table Of Contents
- i!-PCLink/PowerPoint
- Introduction
- Running i!-PCLink/PowerPoint
- Appendix
- Adding Host Entries to the NetLinx URL List
- 1. Open a terminal session (via TELNET or SERIAL) to the NetLinx Master.
- 2. Type "echo on", and press the Enter button.
- 3. Type "url list", and press the Enter button. If no URL’s are in your NetLinx Master, it returns the following response: No URLs in the URL connection list
- 4. To add a URL, type "set url", and press the Enter button. The NetLinx Master should return: Type A and Enter to Add a URL or Enter to exit. ->
- 5. Type "A", and press the Enter button. The NetLinx Master should return: Enter URL ->
- 6. This is where you enter the IP Address of the i!-PCLink/Media Player Host Computer. Type "192.168.1.1", and press the Enter b...
- 7. Press the Enter button to accept the default port (1319). The NetLinx Master should return: Enter Type (Enter for permanent or T for temporary) ->
- 8. Press the Enter button to make the entry permanent. The NetLinx Master should return: URL Added successfully. Type A and Enter to Add a URL or Enter to exit. ->
- 9. Finally, Press the Enter button to exit.
- 10. To make sure the entry was made, or to check the status of the link, type "url list". Press the Enter button. The NetLinx Ma...
- Adding Host Entries to the NetLinx URL List
Introduction
1
i!-PCLinkPowerPoint
Introduction
i!-PCLink/PowerPoint
™
is an application for Microsoft Windows
®
that integrates a NetLinx
control system with Microsoft PowerPoint
®
presentations. By installing i!-PCLink/PowerPoint, a
NetLinx system can:
Take control of your Microsoft® PowerPoint application by allowing you to control
opening, starting, and stopping of a presentation.
Control presentation navigation with real time feedback.
Provide advanced presentation features such as reading speakers notes and browsing
slides by title.
Supported Operating Systems
Windows 2000
®
Professional or Server (running on a Pentium 550 MHz processor
(minimum requirement); 850 MHz or faster recommended, with 96 MB of installed
memory).
Windows XP Professional ® (900 MHZ or faster recommended, with 128 MB of
installed memory).
Minimum PC Requirements
Windows-compatible mouse (or other pointing device)
At least 25 MB of free disk space (150 MB recommended)
VGA monitor, with a minimum screen resolution of 800 x 600
A Network adapter
If you are installing i!-PCLink/PowerPoint on a Windows NT or Windows 2000 machine,
you must have Administrator rights to install and run all required System files.
Installing i!-PCLink/PowerPoint
i!-PCLink/PowerPoint requires the Microsoft®® PowerPoint program. If you don't already have
Microsoft®
PowerPoint installed on your computer, you must obtain it separately and install it.
1. In Explorer, double-click i!-PCLinkPowerPointSetup.exe from the directory window where
you downloaded the i!-PCLink/PowerPoint install program.
2. After reading the License Agreement, select I Agree and Next to proceed.
3. The Welcome To i!-PCLink/PowerPoint Setup dialog appears, reminding you to close all
Windows programs before going any further. Click Next to proceed.
4. In the Select!-PCLink/PowerPoint Install Location dialog, use the Browse button to navigate to
a directory other than the default install directory, if desired. Click Next. PowerPoint (for
Windows®) is not included in the setup, and must be obtained from Microsoft® or authorized
reseller.