User Guide
Table Of Contents
- i!-PCLink/PowerPoint
- Introduction
- Running i!-PCLink/PowerPoint
- Appendix
- Adding Host Entries to the NetLinx URL List
- 1. Open a terminal session (via TELNET or SERIAL) to the NetLinx Master.
- 2. Type "echo on", and press the Enter button.
- 3. Type "url list", and press the Enter button. If no URL’s are in your NetLinx Master, it returns the following response: No URLs in the URL connection list
- 4. To add a URL, type "set url", and press the Enter button. The NetLinx Master should return: Type A and Enter to Add a URL or Enter to exit. ->
- 5. Type "A", and press the Enter button. The NetLinx Master should return: Enter URL ->
- 6. This is where you enter the IP Address of the i!-PCLink/Media Player Host Computer. Type "192.168.1.1", and press the Enter b...
- 7. Press the Enter button to accept the default port (1319). The NetLinx Master should return: Enter Type (Enter for permanent or T for temporary) ->
- 8. Press the Enter button to make the entry permanent. The NetLinx Master should return: URL Added successfully. Type A and Enter to Add a URL or Enter to exit. ->
- 9. Finally, Press the Enter button to exit.
- 10. To make sure the entry was made, or to check the status of the link, type "url list". Press the Enter button. The NetLinx Ma...
- Adding Host Entries to the NetLinx URL List
Running i!-PCLink/PowerPoint
12
i!-PCLinkPowerPoint
Strings
i!-PCLink/PowerPoint supports the following strings.
i!-PCLink/PowerPoint Strings
OperatingSystem-<sys>
Returns operating system information.
PowerPointVersion-<ver>
Returns PowerPoint version.
PresentationName-<name>
Returns name of presentation. Automatically returned after and OPEN
command is issued.
Notes-<note>
Returns a speaker note in response to a Notes command or whenever
the slide changes. You will receive Notes- strings. The default number is
5 and can be modified by using the NOTES- command.
NoteCount-<count>
Returns a total speaker note count in response to a Notes command or
whenever the slide changes.
SlideTitle-<title>
Returns the name of the current slide whenever the slide changes.
ElapsedTime-<time>
Returns the elapsed time of the presentation when timing has been
enabled.
SlideTime-<time>
Returns the elapsed time of the slide when timing has been enabled.
Slide-<slide number>
Returns the slide title in response to a BROWSE command.
SlideCount-<count>
Returns the slide count in response to a BROWSE command.
CurrentDir-<directory>
Returns the Current Directory in response to a DIR or CD command.
TotalCount-<count>
Returns the total file/directory/drive count in response to a DIR or CD
command.
DriveCount-<count>
Returns the total drive count in response to a DIR or CD command.
Drive-<drive>
Returns a drive entry in response to a DIR or CD command.
DirCount-<count>
Returns the total directory count in response to a DIR or CD command.
Dir-<directory>
Returns a directory entry in response to a DIR or CD command.
FileCount-<count>
Returns the total PowerPoint (ppt) file count in response to a DIR or CD
command.
File-<file name>
Returns a PowerPoint (ppt) file entry in response to a DIR or CD com-
mand.