User Guide
Table Of Contents
- i!-PCLink/PowerPoint
- Introduction
- Running i!-PCLink/PowerPoint
- Appendix
- Adding Host Entries to the NetLinx URL List
- 1. Open a terminal session (via TELNET or SERIAL) to the NetLinx Master.
- 2. Type "echo on", and press the Enter button.
- 3. Type "url list", and press the Enter button. If no URL’s are in your NetLinx Master, it returns the following response: No URLs in the URL connection list
- 4. To add a URL, type "set url", and press the Enter button. The NetLinx Master should return: Type A and Enter to Add a URL or Enter to exit. ->
- 5. Type "A", and press the Enter button. The NetLinx Master should return: Enter URL ->
- 6. This is where you enter the IP Address of the i!-PCLink/Media Player Host Computer. Type "192.168.1.1", and press the Enter b...
- 7. Press the Enter button to accept the default port (1319). The NetLinx Master should return: Enter Type (Enter for permanent or T for temporary) ->
- 8. Press the Enter button to make the entry permanent. The NetLinx Master should return: URL Added successfully. Type A and Enter to Add a URL or Enter to exit. ->
- 9. Finally, Press the Enter button to exit.
- 10. To make sure the entry was made, or to check the status of the link, type "url list". Press the Enter button. The NetLinx Ma...
- Adding Host Entries to the NetLinx URL List
Running i!-PCLink/PowerPoint
10
i!-PCLinkPowerPoint
To set a presentation shortcut, please click the button directly to the right of the desired shortcut
position. You will be prompted to select a presentation file. After selection the file, its path should
be displayed in the shortcut field. The buttons with the "X" symbol are used to clear the respective
shortcut position.
Preferences
To navigate to the i!-PCLink/PowerPoint PC software preferences dialog, please select
File - Preferences from the main page.
Prompt for Program to Exit:
If this option is checked, i!-PCLink/PowerPoint will prompt for confirmation to exit anytime
the top right "x" is clicked. To bypass this prompt, please un-check this option.
Start i!-PCLink/PowerPoint with Windows:
If this option is checked, i!-PCLink/PowerPoint will automatically start each time Windows
loads. The program will load into the Windows system tray. To access the
i!-PCLink/PowerPoint software, double click the icon in the system tray.
FIG. 12 Presentation Shortcuts
FIG. 13 Program Preferences
FIG. 14
i!-PCLink/PowerPoint Icon