User Guide

Introduction
1
i!-FTPSender
Introduction
The i!-FTPSender
™
allows you to copy a file from one FTP server to another from NetLinx
™
code.
This is useful to copy files to the NetLinx Master from another FTP server or to copy files from the
NetLinx Master's disc on chip to another FTP server. This module will work between any two FTP
servers; it is not limited to copying files to and from a NetLinx Master.
Supported Operating Systems
 Windows 95
®
/98
®
(with at least 48 MB of installed memory)
 Windows NT 4.0
®
Workstation or Server (service pack 6 B or greater, with at least
64 MB of installed memory)
 Windows 2000
®
Professional or Server (running on a Pentium 233 MHz processor
(minimum requirement); 300 MHz or faster recommended, with 96 MB of installed
memory.)
 Windows ME
®
(running on a Pentium 233 MHz processor (minimum requirement);
300 MHz or faster recommended, with 96 MB of installed memory.)
Minimum PC Requirements
 Windows-compatible mouse (or other pointing device)
 At least 5 MB of free disk space (150 MB recommended)
 VGA monitor, with a minimum screen resolution of 800 x 600
 A Network adapter
Installing i!-FTPSender
1. In Explorer, double-click i!-FTPSenderSetup.exe from the directory window where you
downloaded the i!-Email install program.
2. After reading the License Agreement, select I Agree and Next to proceed.
3. The Welcome To i!-FTPSender Setup dialog appears, reminding you to close all Windows
programs before going any further. Click Next to proceed.
4. In the Select i!-FTPSender Install Location dialog, use the Browse button to navigate to a
directory other than the default install directory, if desired. Click Next.
5. In the i!-FTPSender Shortcut Creation dialog, select Install Shortcut Icons for the installed
components on your desktop, if desired.
6. Click Next in the Start i!-FTPSender Installation dialog to install the selected components.
7. The program prompts you to restart your system to complete the installation.