Product specifications

POWER MANAGEMENT
The Power Distribution Unit (PDU) allows you to control
the rack as well as control the room. With 8 individually
monitored and controlled AC outlets, built-in 12 Volt power
supply, 2 sets of 4 AxLink Bus Strips, and power monitoring
for each outlet, the PDU adds a basic level of control by
allowing remote reset of devices via a power cycle. With
Native NetLinx control over AxLink, it’s also easy to integrate
with Resource Management Suite (RMS) software.
Key Features
Introduces Control at the rack level for Dealers
Combines power supply and power distribution into one device saving
equipment and installation costs
Provides easy method to add an environmentally friendly Green element to
an installation
AMX PDU now supported in RPM. Power on and shut off devices connected
to the PDU outets within the RPM macros.
Control and Reset Power
Right from the Rack
QUICK FACTS NXA-PDU-1508-8
Dimensions (HWD) AC Ports AxLink Ports
1 3/16” x 17” x 9 11/16”
(2.97cm x 43.18cm x 9.66cm)
1 INPUT - 110 – 220VAC
8 OUTPUTS - 110-220VAC
1 AXLINK MASTER PORT
8 AXLINK DEVICE PORTS
(2 BANKS OF 4)
Switched and Monitored
AxLink Bus Strips
Allows power and switching of
AxLink or 12V powered devices
(in banks of four).
Built-in Power Current
Sensing on Each AC Outlet
Makes it easy to tell if a device is
powered on or off.
Power Management of
Connected Devices
Reduces standby energy usage
(vampire power/phantom load).
Individually Controlled
Outlets
Allows a remote reboot for
devices in the rack reducing on-
site service calls.
NetLinx Power Management Family
LOCATION:
Rack Mount, Shelf, Table
EXTERNAL BUTTONS:
1 Reset
CONFIGURATION:
8-position DIP switch sets the AxLink device address for the unit
NXA-PDU-1508-8 I 8 OUTLET PDU
3736
NETLINX POWER
DISTRIBUTION UNIT