Instruction manual

Designing Touch Panel Pages

ViewPoint Wireless Touch Panels

Setting the level code

Level buttons set the device and number codes for the touch panels.

1. Press DEV to open a keypad and set the device number.

2. Enter 1, 2, 3, or 4 in the keypad.

3. Press ENTER to save the device number, close the keypad, and return to the Button Properties

page.

4. Press NUM to open a keypad and set the level number assigned to the device.

5. Enter a number 1 – 8. Each device can range from 1 – 8 levels except for joysticks, where the

range is 1 – 7.

6. Press ENTER to save, close the keypad, and return to the Button Properties page.

Joysticks use two level numbers. The first is for the X-axis and the second is for the

Y-axis. You only need to specify the first level.