User Guide

Welcome To FileTransfer2

ileTransfer2

Supported File Types

The following are the types of files this application can send to and receive from, various NetLinx

and Axcess devices:

 TOK Files

 TKN Files (including compiled Duet TKN Files)

 TP4 Files

 TPD Files

 KPD Files

 IRL/IRV Files

 SRC Files

Notes on supported file types:

 The selection of available file types depends on the selected platform, Send/Receive

selection and communication settings

 All files must mapped to devices before they can be selected for transfer.

 Source Code files cannot be sent until they have been successfully compiled.

 While Touch Panel UI files are sent to the panels themselves, KPD files are sent to the

master and not directly to the keypad. Before sending a KPD (KPDesign) file to the target

keypad(s), be sure that you have successfully compiled the Source Code file that contains

the keypad module, and sent it to the Master (see Configuring NetLinx Source Code for

KPD Files).

Supported Operating Systems and Minimum PC

Requirements

Supported operating systems:

 Windows XP®

 Windows 2000®

PC Requirements:

 Pentium 233 MHZ processor (minimum requirement); 300 MHZ or faster recommended.

 Windows-compatible CD-ROM drive.

 Windows-compatible mouse (or other pointing device).

You must have Administrator rights to install and run all required System files.

If the mouse wheel on your Microsoft® IntelliMouse® doesn't’ work with NetLinx

Studio, try downloading the latest IntelliMouse drivers from Microsoft.