Data Sheet

* Power must be supplied by one of the following DXLink Power sourcing devices: Enova DGX 8/16/32 Digital Media Switcher (with a DXLink
Twisted Pair Input Board installed), Compatible Enova DVX All-In-One Presentation Switcher (3155HD or 2155HD), PS-POE-AT-TC High Power
PoE Injector or PDXL-2 Power over DXLink Controller. AMX only supports the use of these approved Power over DXLink solutions. Other
third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment.
Dealer Benefits
 HDMI/HDCP with the Simplicity of Analog - Hassle-free plug-and-play operation eliminates the need for
time consuming, cumbersome work-around tools to deal with HDCP key constraints and resolution
incompatibilities
 Installation Friendly - Standard two gang size and remote powering capabilities allows the wallplate to be
installed in virtually any location
Customer Benefits
 Interruption-Free Content - Exclusive InstaGate Pro® Technology allows audio and video to be switched
quickly and easily to every connected display without the difficulties typically associated with HDCP
 Easily Connect Guest Devices - Provides a versatile solution for environments where sources are consistently
changing
Additional Features
 Power Remotely - Power is carried over twisted pair to simplify installation when used with the Enova DGX
 3D Support** - Pass through latest video formats including 3D and Deep Color
 Surround Sound Support - Pass through high definition surround sound including Dolby Digital, DTS and up to
8-channel L-PCM at 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
 HDCP Compliant
**This feature will be available upon release of a future firmware update
Specifications
GENERAL
Dimensions (HWD)
4 11/16" x 6" x 1 5/16" (11.90 cm x 15.20 cm x 3.33
cm)
Installation
Mounts onto standard 2 gang US, UK or EU back boxes
Weight
Approx. 1.4 lb (0.64 kg)
Shipping Weight: Approx. 2.2 lb (1.0 kg)
Compatible AMX Products
•Enova DGX 8/16/32 Digital Media Switchers
•Enova DVX-3155 and 2155 All-In-One Presentation
Switchers
•DXLink HDMI RX as a point-to-point solution (when
Wallplates are powered by PS-POE-AT-TC or PDXL-2)
•PS-POE-AT-TC High Power PoE Injector
•PDXL-2 Power over DXLink Controller
Airflow
Natural convection via air vent openings on front, back
and top
MTBF
381,000 hours
Approvals
CE, FCC, UL, cUL, RoHS / WEEE compliant
**This feature will be available upon release of a future firmware update
*** Cable runs with a minimum specification of ANSI/TIE/EIA 568A-5 and ratings of 250MHz or better may be used with DXLink equipment. However, cable
run topology and environmental influences can affect the overall successful distance capabilities of these runs. For successful deployments up to 100
meters without consideration to outside variables, AMX recommends the use of shielded category cable (STP) or Cat6A (or better) versions of unshielded or
shielded twisted pair (UTP/STP) for DXLink runs. For more details and helpful cabling information, please contact your AMX representative for a copy of the
white paper titled “Cabling for Success with DXLink”. IMPORTANT NOTICE: DXLink twisted pair cable runs for DXLink equipment should only be run within a
common building.
ACTIVE POWER REQUIREMENTS
DXLink Power
Power must be supplied by a DXLink Power sourcing
device such as:
•Enova DGX 8/16/32 Digital Media Switcher (with a
DXLink Twisted Pair Input Board installed)
•Compatible Enova DVX All-In-One Presentation
Switcher (3155HD or 2155HD)