Specifications

EXB-REL8
35
ICSLan Device Control Boxes
EXB-REL8
Overview
The EXB-REL8 Networked 8-Relay Device (FG2100-20) provides eight relays that support devices that
employ simple momentary or latching contact-closure control, with LED feedback.
EXB-REL8 Product Specifications
In addition to the features described in the ICSLan Device Control Boxes - Common Features table on page 2,
the EXB-REL8 module features the following components:
FIG. 10 EXB-REL8
EXB-REL8 Specifications
Power Requirements
PoE (Power-over-Ethernet)
Power Draw: • Idle (min): 40mA 1.92 watts
• Busy (max): 70mA 3.36 watts
Front Panel Components
Relay LEDs (1-8) 8 (red) LEDs light to indicate which relays 1-8 are active (active = contacts closed).
Rear Panel Components
1 Relay Port Connector: 3.5mm Phoenix – 16 positions.
This port is designated as Port 1, Channels 1-8
Included Accessories • Two 8-pin 3.5 mm mini-Phoenix female Relay connectors (41-5083)
• 8-position Commoning Strip for 3.5mm mini-Phoenix (41-2105-01)
Other AMX Equipment • NXA-ENET8POE Gigabit Ethernet Switch (FG2178-62)
• PS-POE-AF PoE Injector (FG423-80)
• AVB-VSTYLE-SURFACE-MNT V-Style Module Surface Mount (FG1010-722)
• AVB-VSTYLE-RMK-1U V-Style Module Tray (FG1010-720)
• AVB-VSTYLE-RMK-FILL-1U V-Style Module Tray w/ fill plates (FG1010-721)
• AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)
(front)
(rear)
Relay (1-8) LEDs
LINK/ACT LED
STATUS LED
Ethernet Port (RJ-45)
ID Pushbutton
Relays 5-8 Relays 1-4