Specifications

EXB-MP1
34
ICSLan Device Control Boxes
NetLinx Programming
EXB-MP1 SEND_COMMANDs
The following NetLinx SEND_COMMANDs are supported by the EXB-MP1 Module:
SEND_STRING Escape Sequences
The EXB-COM2 and EXB-MP1 support several special SEND_STRING escape sequences. If any of the
escape sequences are found anywhere within a SEND_STRING program instruction, they will be treated as a
command and not the literal characters.
See the SEND_STRING Escape Sequences section on page 51 for details.
Telnet commands
Refer to the Terminal (Telnet) Commands section on page 53 for a listing of all supported Telnet commands.
EXB-MP1 SEND_COMMANDs
Command Page Reference Command Page Reference
B9MOFF page 37 LED-DIS page 42
B9MON page 37 LED-EN page 42
CAROFF page 37 REBOOT page 44
CARON page 37 RXCLR page 45
CH page 38 RXOFF page 45
CHARD page 38 RXON page 45
CHARDM page 38 SET_NDX_DESC page 47
CP page 39 SET BAUD page 45
CTOF page 39 SET DBT page 46
CTON page 39 SET DBTF page 46
CTSPSH page 40 SET INPUT page 46
CTSPSH OFF page 40 SET MODE page 47
ESCSEQOFF page 40 SET OFF DELAY page 47
ESCSEQON page 40 SET ON DELAY page 47
GET BAUD page 40 SP page 48
GET DBT page 40 TSET BAUD page 48
GET INPUT page 41 TXCLR page 48
GET MODE page 41 XCH page 49
GET OFF DELAY page 41 XCHM page 49
GET ON DELAY page 41 XOFF page 50
HSOFF page 41 XON page 50
HSON page 41
IROFF page 42