Specifications

EXB-MP1
32
ICSLan Device Control Boxes
Connections and Wiring
LAN/PoE Port (RJ45)
The LAN/PoE (RJ45) port on the front panel provides 10/100 BaseT network connectivity. Use standard
Cat5/6/6E ethernet cable to connect the EXB Module to the LAN. Refer to the LAN/PoE Port section on
page 7 for the pinout configuration for this port.
Port 1 (RS-232 only)
Port 1 on the rear panel is a 5-pin 3.5mm captive-wire connector that supports RS-232 (only) serial
communication.
Port 2 (I/O)
Port 2 on the rear panel is an 4-pin 3.5mm captive-wire connector that provides two I/O contacts (1-2) as well
as PWR and GND.
EXB-MP1 Specifications (Cont.)
Rear Panel Components
RS232 Port (Port 1) Connector: 3.5mm Phoenix – 5 position (Serial RS232 only)
I/O Port (Port 2) Connector: 3.5mm Phoenix – 4 position
IR-TX/Serial Port (Port 3) Connector: 3.5mm Phoenix – 2 position
IR-RX Port (Port 4) Connector: 1/8th inch (6.35 mm) TRS connector
Included Accessories • CC-NIRC IR Emitter
• 5-pin 3.5 mm mini-Phoenix (female) RS-232 connector (41-0336)
• 4-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5047)
Other AMX Equipment • IR03 External IR Receiver Module (FG-IR03)
• NXA-ENET8POE Gigabit Ethernet Switch (FG2178-62)
• PS-POE-AF PoE Injector (FG423-80)
• AVB-VSTYLE-SURFACE-MNT V-Style Module Surface Mount (FG1010-722)
• AVB-VSTYLE-RMK-1U V-Style Module Tray (FG1010-720)
• AVB-VSTYLE-RMK-FILL-1U V-Style Module Tray w/ fill plates (FG1010-721)
• AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)
Refer to the Common Features section on page 2 for product specifications common
to all EXB Modules.
EXB-MP1 Port 1 Pin Assignments
Signal Function
RTS Request to send
CTS Clear to send
TXD Transmit data
RXD Receive data
GND Signal ground
EXB-MP1 Port 2 Pin Assignments
Signal Function
+12VDC +12VDC (max current 200 mA)
2 Channel 2 - Same as Channel 1.
1 Channel 1
GND Ground