Specifications

EXB-COM2
17
ICSLan Device Control Boxes
EXB-COM2
Overview
The EXB-COM2 Networked COM2 Device (FG2100-22) provides 2 serial ports: one RS-232/422/485 port,
and one RS-232 (only) port.
EXB-COM2 Product Specifications
In addition to the features described in the ICSLan Device Control Boxes - Common Features table on page 2,
the components and specifications listed below are specific to the EXB-COM2 module:
FIG. 6 EXB-COM2
EXB-COM2 Specifications
Power Requirements
PoE (Power-over-Ethernet)
Power Draw • Idle (min): 40mA 1.92 watts
• Busy (max): 40mA 1.92 watts
Front Panel Components
Port 1 TX/RX LEDs • Yellow (RX): indicates incoming activity on Port 1.
• Red (TX): indicates outgoing activity on Port 1.
Port 2 TX/RX LEDs • Yellow (RX): indicates incoming activity on Port 2.
• Red (TX): indicates outgoing activity on Port 2.
Rear Panel Components
RS232 Port (Port 2) Connector: 3.5mm Phoenix – 5 position
RS232/422/485 Port (Port 1) Connector: 3.5mm Phoenix – 10 position
Included Accessories • 10-pin 3.5 mm mini-Phoenix (female) RS-232/422/485 connector (41-5107)
• 5-pin 3.5 mm mini-Phoenix (female) RS-232 connector (41-0336)
Other AMX Equipment • NXA-ENET8POE Gigabit Ethernet Switch (FG2178-62)
• PS-POE-AF PoE Injector (FG423-80)
• AVB-VSTYLE-SURFACE-MNT V-Style Module Surface Mount
(FG1010-722)
• AVB-VSTYLE-RMK-1U V-Style Module Tray (FG1010-720)
• AVB-VSTYLE-RMK-FILL-1U V-Style Module Tray w/ fill plates (FG1010-721)
• AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)
(front)
(rear)
LINK/ACT LED
STATUS LED
Port 1 TX/RX LEDs
Ethernet Port (RJ-45)
PORT 1
Port 2 TX/RX LEDs
ID Pushbutton
PORT 2
(RS-232 only) (Multi-Protocol)