Specifications

Installation
5
ICSLan Device Control Boxes
Installation
Mounting Options (Rack Trays and Mounting Brackets)
Refer to the documentation provided with each of the mounting kits for installation instructions (also available
online at www.amx.com).
AVB-VSTYLE-SURFACE-MNT (FG1010-722)
V Style Single Module Surface Mount Brackets - Mount a single module to the wall, under a desk, etc
(FIG. 2).
AVB-VSTYLE-RMK (FG1010-720)
V Style Module Tray Rack - Mount up to four modules side by side in a 1 RU space (FIG. 3).
AVB-VSTYLE-RMK-FILL-1U (FG1010-721)
V Style Module Tray Rack - Mount up to four modules side by side in a 1 RU space, with Fill Plates for
instances when the entire tray is not full (FIG. 3).
Note that the tray illustrated in FIG. 3 is shown upside down for ease of installation. However, the tray can be
rack-mounted in a rack either way.
Also note that the Fill Plate included in this illustration is included only in the AVB-VSTYLE-RMK-FILL-1U
(FG1010-721).
FIG. 2 AVB-VSTYLE-SURFACE-MNT
FIG. 3 AVB-VSTYLE-RMK
Below surface mounting
Above surface mounting
Fill Plate
(included with the AVB-VSTYLE-RMK-FILL-1U mounting kit only)
The AVB-VSTYLE-RMK and AVB-VSTYLE-RMK-FILL-1U mounting kits are
appropriate for the EXB-COM2, -IRS4, -IO8 and -REL8 (but not the EXB-MP1).