Specifications

Programming
69
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
SEND_COMMANDS
The commands listed in the following sections are for the switcher only. For generic NetLinx commands, see
the NetLinx Integrated Controllers WebConsole and Programming Guide.
The commands derive their input/output port addressing from the target D:P:S.
INPUT ports range from 1-8 for Audio and from 1-6 for Video.
The extra ports 7 and 8 on the Audio subsystem represent MIC1 and MIC2 respectively.
Ports 5 and 6 are UTP inputs. Audio and Video functionalities are disambiguated from the
overlapped port numbers by combining them with the command name.
There are two Audio output ports (05002:1:0 and 05002:2:0).
Audio Output Port #1 is the Main Amp Output and most audio commands are addressed to this
port.
Audio Output Port #2 is the Line Output and normally tracks the Main Amp Output port with small
exceptions (For example, the AUDOUT_VARIABLE command.)
There are two Video output ports (05002:1:0 and 05002:2:0).
Video Output Port #1 is the DVI/Main Video Output port.
Video Output Port #2 is the RGB Output port.
Input and Output functional distinctions are disambiguated from the overlapped port numbers by
combining them with the command name.
The following table lists the port functionality mapping for the audio/video ports on the DVX-2100HD:
Port Functionality Mapping
05002:1:0 AUDIO/VIDEO input #1, AUDIO/VIDEO output #1
05002:2:0 AUDIO/VIDEO input #2, AUDIO/VIDEO output #2
05002:3:0 AUDIO/VIDEO input #3
05002:4:0
AUDIO/VIDEO input #4
05002:5:0
AUDIO/VIDEO input #5
05002:6:0
AUDIO/VIDEO input #6
05002:7:0
AUDIO MIC #1 input
05002:8:0
AUDIO MIC #2 input
05002:9:0
MACRO button/channel input