Specifications

Audio/Video Configuration
51
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
The following table lists the global options for the WebConsole Configuration page:
Video Settings
FIG. 54 displays the Video page. The Video page enables you to set the resolution, aspect ratio, and picture
qualities of each individual video input. Any changes you make reflect instantaneously on your source input
and output devices.
Global Options
Mute Turns off the audio for the device.
Global Volume Sets the output volume.
Refresh Click to reload all settings.
Restore Factory Defaults Click to reset the input signal’s settings to their factory default.
FIG. 54
WebConsole Configuration page - Video tab
1 - Input Select: Select the corresponding option button to select the incoming video signal. When you select
an input, the other options on the page change to reflect the input’s current settings. The option button
changes color depending on whether video is detected on the selected input. Green indicates a signal is
detected, yellow indicates a signal is detected but cannot be identified, and red indicates no signal is detected.
You can only select one video input at a time. Select None to send no signal to the output display. You can click
the Refresh button on the page to update the color coding on the Video Input Select Radio buttons. Click
Refresh after connecting a new input or correcting a resolution on the input so you can be sure it is working.
2 - OSD Name: Enter a unique name for the device in the space provided to more easily identify each input.
The name you enter here appears in the on-screen display (OSD), if enabled. These fields are optional.
3 - Video Format: Use the drop-down menus to select the video format for each video input. The selection
should indicate the type of connection used to connect the video source to the switcher. You can choose from
DVI, VGA, Component, S-Video, and Composite.
4
1
2
3
6
5
4
7
8
9
9
10
11
12
13 14