Specifications

Overview
6
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Mounting the DVX-2100HD into an Equipment Rack
The DVX-2100HD occupies two rack units in a standard equipment rack. The following steps apply to
mounting the DVX-2100HD.
1. Discharge any static electricity from your body by touching a grounded metal object.
2. Position and install the mounting brackets, as shown in FIG. 2, using the supplied mounting screws.
3. Install the DVX-2100HD in the mounting rack by using the mounting screws to affix the unit to the rack.
4. Connect any applicable wires to the DVX-2100HD. Refer to the Wiring and Device Connections section
on page 9 for wiring diagrams and pinout descriptions.
Connect the unit only to a properly-rated supply circuit.
FIG. 2 Rack mounting the DVX-2100HD
Mounting screws
Mounting bracket
Mounting screws
Mounting bracket
Mounting
holes
front
DO NOT stand other units directly on top of the DVX-2100HD when it is rack
mounted, as this will place excessive strain on the mounting brackets.