Instruction manual

NetLinx Programming – DXLink Fiber TXs/RXs
67
Instruction Manual – DXLink™ Fiber Transmitters and Receivers, Duplex
In NetLinx Studio’s OnLine Tree, the DXLink Fiber Transmitters and Receivers each display their ports.
Note: For additional information on using NetLinx Studio, refer to the “Instruction Manual – NetLinx Studio
v3.3” and the “WebConsole & Programming Guide – NetLinx Integrated Controllers” (available at
www.amx.com
).
Note: All command text is based on a Unicode index.
Tip: Occasionally new firmware versions affect SEND_COMMANDs. If a command does not produce the
expected results, we suggest checking the product’s current firmware version against the information in the
“Firmware Version” table on page 92.
FIG. 25 NetLinx Studio OnLine Tree - Ports 1-8 on DXLink Fiber Transmitter and Ports 1-7 on Receiver
Ports 1-8 on DXLink Fiber Transmitter
(device number 25001)
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) input and output
Port 6 - Digital Video/Audio Output
Port 7 - Digital Video/Audio Input
Ports 1-7 on DXLink Fiber Receiver
(device number 30001)
Port 1 - Serial ICSP (COM)
Port 2 - Not used
Port 3 - IR Output
Port 4 - IR Input
Port 5 - USB (HID) host data
Port 6 - Digital Video/Audio Output
Port 7 - Digital Video/Audio Input
DXLink Fiber Transmitter
DXLink Fiber Receiver
Port 8 - Analog Video Input