Instruction manual

Overview DXLink Fiber, Duplex
16
Instruction Manual – DXLink™ Fiber Transmitters and Receivers, Duplex
Features – DXLink Fiber Transmitters and Receivers, Duplex
Optical transport rate of 10 Gbps.
Incorporates HDMI
®
technology.
HDCP 1.3 compatible.
Supports computer video up to 1920x1200, HDTV up to 1080p, as well as 3D support (3D and Deep Color).
Supports HDMI pass through with embedded digital audio and single link DVI (via DVI-to-HDMI cable).
A local HDMI output connector on the front of the Transmitters for sending the video signal from the source
directly to a local destination device.
DXLink Fiber TX, Duplex units support analog video: composite, Y/C, Y/Pb/Pr, RGB, RGBS, or RGBHV.
DXLink MMF-D units transport video signals over distances up to 984 feet (300 m).
DXLink SMF-D units transport video signals over distances up to 6.21 miles (10 km).
Interruption free content when used in conjunction with a switcher; AMX’s exclusive InstaGate Pro
®
Technology allows audio and video to be switched quickly and easily to every connected display without the
difficulties typically associated with HDCP.
AutoDetect on the Transmitters and SmartScale
®
on the Receivers work to automatically recognize any
device’s supported resolutions and signal type parameters, allowing switching out source and destination
devices without manual setup. Also included is the ability to control detailed timing parameters for
customized video output formats. (SmartScale is the ability to configure the scaling output by automatically
selecting destination defined resolutions.)
Supports HDMI embedded digital audio and analog stereo audio.
Fiber optic cable (for fiber cable specifications, see page 28).
Field serviceable SFP+ fiber optic transceivers, easier to remove and replace an individual transceiver rather
than a TX or RX unit or an Enova DGX DXLink Fiber Board.
The USB port on the Receivers passes keyboard and mouse USB signals to control a remote computer. The
Transmitter’s USB port connects to a Host PC and will forward HID keyboard and mouse data received from
a Receiver’s USB port (for USB information, see page 23).
The 232 port (RS-232 serial) supports bidirectional transfer of serial data between TX/Master/RX (Endpoint
Mode).
The IR port supports bidirectional transfer of IR data between TX/Master/RX (Endpoint Mode).
A desktop power supply (ENERGY STAR
®
qualified) is provided per DXLink Fiber unit.
The Transmitters and Receivers are compatible with all V Style, versatile mounting options including rack,
surface, and pole.
Backed by AMX’s 3 year warranty (see www.amx.com).
24-hour technical support.
Note: Features and specifications described in this document are subject to change without notice.