Instruction manual

Programming
82
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
SEND_COMMANDS
The commands listed in the following sections are for the switcher only. For generic NetLinx commands, see the
NetLinx Integrated Controllers WebConsole and Programming Guide.
The commands derive their input/output port addressing from the target D:P:S.
INPUT ports range from 5-14 for Audio and from 1-10 for Video. HDMI inputs are capable of carrying both
digital audio and video signals
The extra ports 1 and 2 on the Audio subsystem represent MIC1 and MIC2 respectively.
There are four Audio output ports (05002:1:0, 05002:2:0, 05002:3:0, and 05002:4:0).
Audio Output Port #1 is the Main Amp Output and most audio commands are addressed to this port.
Audio Output Ports 2-4 are the Line Outputs and normally track the Main Amp Output port with small
exceptions.
There are four Video output ports (05002:1:0, 05002:2:0, 05002:3:0, and 05002:4:0).
Input and Output functional distinctions are disambiguated from the overlapped port numbers by combining
them with the command name.
The following table lists the port functionality mapping for the audio/video ports on the DVX:
Port Functionality Mapping
Port Number Description Address
1 Audio/Video Input 1 05002:1:0
2 Audio/Video Input 2 05002:2:0
3 Audio/Video Input 3 05002:3:0
4 Audio/Video Input 4 05002:4:0
5 Audio/Video Input 5 05002:5:0
6 Audio/Video Input 6 05002:6:0
7 Audio/Video Input 7 05002:7:0
8 Audio/Video Input 8 05002:8:0
9 Audio/Video Input 9 05002:9:0
10 Audio/Video Input 10 05002:10:0
11 Audio Input 11 05002:11:0
12 Audio Input 12 05002:12:0
13 Audio Input 13 05002:13:0
14 Audio Input 14 05002:14:0
1 Mic In 1 05002:1:0
2 Mic In 2 05002:2:0
1 Audio Output 1 (Amplified) 05002:1:0
2 Audio Output 2 05002:2:0
3 Audio Output 3 05002:3:0
4 Audio Output 4 05002:4:0
1 Audio/Video Output1 05002:1:0
2 Audio/Video Output2 05002:2:0
3 Audio/Video Output3 05002:3:0
4 Audio/Video Output4 05002:4:0