Instruction manual

Programming
78
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Channel Video Switching
To do video switching via channels, the channel must be turned ON (as opposed to pulsing the channel).
For example, turn on Channel 31 on Port 1 for Input 1 to output video.
The DVX-315x video channels are 31-40 (Ports 1-4) - see DVX-315x NetLinx Channels on page 76
The DVX-21xx video channels are 31-36 (Ports 1-3) - see DVX-21xx NetLinx Channels on page 77
These channels are mutually exclusive:
Turning On another channel will change input and turn off the last channel.
Turning Off a selected channel will select input none.
Pulsing any channel will set the input to that channel momentarily (the duration of the PULSE), then to
NONE.
DVX-21xx NetLinx Channels (Cont.)
Channel Ports Description
70 1-2 Video Output Enable
71 1-2 Mic Enable
83 1-2 Video In Phase Ramp Up
84 1-2 Video In Phase Ramp Down
100 1 Standby State. See the Standby Mode on page 79 for more information.
132 1-6 Video In V-Shift Ramp Up (only applicable when routed to a scaled output)
133 1-6 Video In V-Shift Ramp Down
134 1-6 Video In H-Shift Ramp Up
135 1-6 Video In H-Shift Ramp Down
140 1-6 Audio Input Gain Up
141 1-6 Audio Input Gain Down
142 1-6 Black and White State
143 1-6 Audio Input Gain Mute (Reserved for future use)
144 1-6 Audio Input Gain Mute Cycle (Reserved for future use)
148 1-6 Video In Brightness Ramp Up (only applicable when routed to a scaled output)
149 1-6 Video In Brightness Ramp Down (only applicable when routed to a scaled output)
150 1-6 Video In Saturation Ramp Up (only applicable when routed to a scaled output)
151 1-6 Video In Saturation Ramp Down (only applicable when routed to a scaled output)
152 1-6 Video In Contrast Ramp Up (only applicable when routed to a scaled output)
153 1-6 Video In Contrast Ramp Down (only applicable when routed to a scaled output)
156 1-6 Video In Hue Ramp Up (only applicable when routed to a scaled output)
157 1-6 Video In Hue Ramp Down (only applicable when routed to a scaled output)
158 1-2 Output Zoom Ramp Up
159 1-2 Output Zoom Ramp Down
164 1-3 Audio Output Balance Ramp Left (output 1 is only applicable on -SP units)
165 1-3 Audio Output Balance Ramp Right (output 1 is only applicable on -SP units)
196 1-3 Source Cycle
199 1-3 Volume Mute Set and State
210 1-3 Video Mute Set and State
213 1-2 Video Freeze Set and State
216 1 Fan Alarm (read-only channel)
217 1 Temperature Alarm (read-only channel)
234 1-2 OSD State