Instruction manual

NetLinx Firmware Upgrades
69
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
NetLinx Firmware Upgrades
Overview
Upgrading firmware on Enova DVX All-In-One Presentation Switchers involves downloading the latest firmware files
from www.amx.com and using NetLinx Studio to transfer the files to a target DVX. The NetLinx Studio software
application (available for free download from www.amx.com) provides the ability to transfer KIT firmware files to a
NetLinx device such as the DVX.
Use the Online Device tree in NetLinx Studio to view the firmware files currently loaded on the Central Controller.
FIG. 68 shows an example Online Tree:
FIG. 68 NetLinx Studio - Sample Online Tree
DVX Switchers contain three devices (NI Master, Device Controller, and A/V Switcher/Scaler), each of which require a
separate Kit file. These three devices must be kept at compatible firmware versions for proper operation. Therefore, all
three files should be used when upgrading any firmware associated with the DVX.
DVX Controllers - Firmware Files
NI Master Firmware The on-board NI Master is listed first in the Online Tree as
"00000 NI Master (<firmware version>)"
• "00000" represents Device ID 0, which is reserved for the Master
• The number in parenthesis is the current Master firmware version.
Device Controller Firmware The Device Controller is listed next as
"05001 NI-XXXX (<firmware version>)"
• "05001" represents Device ID 5001, which is reserved for the Device
Control ports.
• The number in parenthesis is the current Device Controller firmware
version.
A/V Switcher/Scaler Firmware The A/V Switcher/Scaler is listed third as
"05002 NI-XXXX (<firmware version>)"
• "05002" represents Device ID 5002, which is reserved for the A/V
Switcher/Scaler.
• The number in parenthesis is the current Device Controller firmware
version.
NI Master (Port 0)
Device Controller (Port 5001)
Switcher (Port 5002)