Instruction manual

Audio/Video Configuration
61
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio Settings
The Audio page enables you to set the audio qualities for each audio input, microphone input, amplifier output, and line
output. Any changes you make reflect instantaneously on your source input and output devices.
Audio Out
FIG. 65 displays the Audio Out page for the DVX.
FIG. 65 WebConsole Configuration page - Audio Out tab
6 - EDID Mode: Use the menus to indicate the desired EDID information to be sent to the selected video source. You can
choose from one of the built-in EDID files which includes All Resolutions, only Full Screen Resolutions, or only Wide
Screen Resolutions, or you can choose to mirror the EDID received from any connected display. Choosing one of the
mirror modes turns off the HDMI Audio control for the selected input.
The Preferred EDID menu is only available if you select one of the internal EDID files (All, Full, or Wide). In this mode you
can select the specific preferred resolution to present to the connected source.
The Auto EDID Update check box and the update EDID button are only available if you select to mirror the EDID from a
connected display. Select the Auto EDID Update check box if you want the EDID sent to the source to update anytime the
EDID received from the connected display changes. De-select this check box to prevent automatically updating the EDID
sent to the source and only update the EDID when the Update EDID button is clicked.
7 - HDCP Setting: Click the check box to activate HDCP compliance on the selected input. HDCP compliance is active
by default.
8 - Image Settings: Click the Color or B&W option button to select a color setting for the video input. Use the sliders to
alter the brightness, contrast, saturation, and hue for the video input.
9 - VGA Settings: Use the sliders to alter the phase, horizontal shift, and vertical shift settings for VGA inputs.
1 - Analog Output: Select the corresponding option button to select an audio output to adjust. You can only select one
audio output at a time.
Click the Track Output 1 check box to track the amp volume for Output 1.
This option is only available for outputs 2, 3, and 4.
1
4
5
6
9
10
2
3
8
7
8