Instruction manual

Audio/Video Configuration

Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual

Microphone Settings

The following table lists the microphone options available on the LCD display by pressing the AUDIO MENU button on

the front panel:

Selecting an Audio Test Tone

Selecting a test tone for your input source can help determine if you have your audio devices connected correctly.

Perform these steps to select a test tone:

1. Press the AUDIO MENU button on the front panel of the DVX.

2. Press the left and right navigation buttons to select the output on which to play the test tone.

3. Press the down navigational button until the Test Tone option appears.

4. Use the left and right navigational buttons to select an appropriate audio test tone.

Mic Input Menu Options

Mic Input Mode Use the left and right buttons to select either Single Stereo to adjust both microphone inputs or Dual

Mono Mode to adjust the microphone settings individually.

If you select Dual Mono Mode, be sure to select the desired microphone from the Mic Input Select

option before adjusting the available settings for the microphone.

Mic Input Select Use the left and right buttons to manually select which microphone input you want to use. When in

Dual Mode, you can choose from 1 or 2.

Enable Use the left and right buttons to toggle whether the selected microphone is active. Select either Off or

On. The default setting is Off.

Preamp Gain Use the left and right buttons to adjust the preamp gain level of the microphone input.

Set the gain from 0 to +65dB in 1dB increments. The default setting is 0.

Gain Use the left and right buttons to adjust the gain/attention level of the microphone input.

Set the gain from -24 to +24dB in 1dB increments. The default setting is 0.

Compression Use the left and right buttons to adjust the compression level of the selected microphone. S

elect Off, Low, Medium, High, and Custom. The default value is Off.

Limiter Use the left and right buttons to adjust the limiter function which suppresses loud noise bursts from

dropping the mic and helps avoid feedback noise.

Select Off, Low, Medium, High, and Custom. The default setting is Off.

Gating Use the left and right buttons to adjust the noise gate which filters background noise.

Select Off, Low, Medium, High, and Custom. The default setting is Off.

Phantom Power Use the left and right buttons to turn on or turn off phantom power for the selected microphone. Select

either On or Off. The default setting is Off.

Revert to Default Use the left and right buttons to indicate that you want to return all microphone options to their default

settings.