Instruction manual

Audio/Video Configuration
51
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio Output Menu Options (Cont.)
Mic2 Mix Use the left and right buttons to set the mix level of microphone 2 in the overall mix.
Set the mix level from 0 to -100. The default setting is 0.
HDMI Use the left and right buttons to indicate which analog audio output to embed in the selected HDMI
output. Select Out1, Out2, Out3, Out4, Pass-thru, or Off.
HDMI EQ Use the left and right buttons to toggle whether the equalizer settings for the selected analog output
should be applied to the HDMI output.
Select On or Off. The default value is Off.
SPDIF Use the left and right buttons to indicate the audio stream to output through the S/PDIF output. Select
from any of the available audio outputs including the audio on the HDMI outputs.
Max Volume Use the left and right buttons to adjust the maximum volume of the audio output.
Set the maximum volume from 0 to 100 in increments of 1. The default value is 100.
Min Volume Use the left and right buttons to adjust the minimum volume of the audio output.
Set the minimum volume from 0 to 100 in increments of 1. The default value is 0.
Delay (ms) Use the left and right buttons to set the number of milliseconds to delay the audio.
The default value is 32.
Test Tone Use the left and right buttons to select an internally generated audible tone. The selected tone overrides
any input source selection.
Select Off, 60Hz, 250Hz, 400Hz, 1kHz, 3kHz, 5kHz, 10kHz, Pink Noise, or White Noise. Selecting 'Off'
removes the override, allowing you to hear audio from the selected source.
Ducking Use the left and right buttons to set the ducking level of the audio output. Select Off, Low, Med, High,
and Custom. The default setting is Off.
All detailed parameter adjustments for the Custom setting can be made from the web user interface. See
the Using a Web Browser section on page 56 for more information.
Mic Threshold Use the left and right buttons to set the threshold of the ducker for microphone 1.
Set the threshold level from 0 to -60.
Mic Priority Use the left and right buttons to indicate whether Mic 1 has priority over Mic 2.
Select either None or Mic1.
Revert to
Default
Use the left and right buttons to indicate that you want to return all audio output options to their default
settings.
Audio Input Menu Options
Audio Input
Select
Use the left and right buttons to manually select which video input you want to use. Select any of the
available audio inputs.
Gain Use the left and right buttons to adjust the gain/attention level of the audio input.
Set the gain from -24 to +24dB in 1dB increments. The default setting is 0.
Format Use the left and right buttons to toggle the analog format for the audio input. Select either Stereo or
Mono. The default setting is Stereo.
Digital Use the left and right buttons to select a digital format for the selected audio input.
Select PCM 2-Channel, PCM Multi-Channel, AC-3 (Dolby), AC-3 + DTS, AC-3 + MPEG,
AC-3 + AAC, Dolby TrueHD, or DTS HD Master.
Compression Use the left and right buttons to adjust the compression level of the selected audio input.
Select Off, Low, Medium, High, and Custom. The default value is Off.
Revert to
Default
Use the left and right buttons to indicate that you want to return all audio input options to their default
settings.