Instruction manual

Audio/Video Configuration
50
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Setting the Video Type for a Video Input
Each video input type must be set manually. Perform these steps to set the video type for a video input:
1. Press the VIDEO MENU button on the front panel of the DVX two times to open the Video Input menu.
2. Press the left and right navigation buttons to select the input to change.
3. Press the down navigational button until the Type option appears.
4. Use the left and right navigational buttons to select the video format for the selected input.
Changing the Video Output Resolution
Perform these steps to change the video output resolution:
1. Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2. Press the left and right navigation buttons to select the output to change.
3. Press the down navigational button until the Resolution option appears.
4. Use the left and right navigational buttons to locate the appropriate output resolution and refresh rate. You can also
choose Auto to automatically detect the resolution and refresh rate.
Changing the Output Aspect Ratio
Perform these steps to change the output aspect ratio:
1. Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2. Press the left and right navigation buttons to select the output to change.
3. Press the down navigational button until the Aspect Ratio option appears.
4. Use the left and right navigational buttons to locate the appropriate aspect ratio.
Selecting a Video Test Pattern
Selecting a test pattern for your input source can help determine if the displays are connected correctly. Perform these
steps the select a test pattern:
1. Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2. Press the left and right navigation buttons to select the output on which to display the test pattern.
3. Press the down navigational button until the Logo/Test option appears.
4. Use the left and right navigational buttons to select the appropriate output test pattern.
Audio Settings
The following tables list the audio options available on the LCD display by pressing the AUDIO MENU button on the
front panel:
Audio Output Menu Options
Audio Output
Select
Use the left and right buttons to select which video output you want to use.
Select 1, 2, 3, 4, or ALL. (1, 2, 3, or ALL on 21xx DVX models.)
Volume Use the left and right buttons to set the volume of the selected audio output.
Set the volume from 0 to 100. The default setting is 20.
EQ Preset Use the left and right buttons to select a group of preset equalizer settings.
Select Voice, Movie, Music, or Off.
Balance Use the left and right buttons to adjust the balance level of the selected audio output.
Set the balance level from -20 to +20. The default value is 0.
Format Use the left and right buttons to change the audio format of the selected audio input.
Set the audio format to Stereo or Mono. The default setting is Stereo.
Track Output 1 Use the left and right buttons to indicate whether you want to activate amp volume tracking on the
selected audio output. This option tracks the amp volume for Output 1 and is only available on ports 2-4.
Select Off or On.
SRC Mix Use the left and right buttons to set the mix level of the audio input source in the overall mix.
Set the mix level from 0 to -100. The default setting is 0.
Mic1 Mix Use the left and right buttons to set the mix level of microphone 1 in the overall mix.
Set the mix level from 0 to -100. The default setting is 0.