Instruction manual

Audio/Video Configuration
48
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Video Output Menu Options (Cont.)
AR Use the left and right buttons to select how video inputs should be displayed when the input and output
aspect ratio do not match. Select one of the following options:
• MAINTAIN: Maintains the input aspect ratio while filling the screen either vertically or horizontally. Black
bars may appear above and below or to the left and right of the image.
• STRETCH: Ignores the input aspect ratio and stretches the image to fill the screen in all directions.
• ZOOM: Maintains the input aspect ratio while zooming the image to fill the screen in all directions.
Image data may be lost on the top and bottom or to the left and right of the displayed image.
• ANAMORPHIC: Use with anamorphic formatted video sources so that images appear correctly on the
display.
The default setting is STRETCH.
Logo/Test Use the left and right buttons to choose an output test pattern. Select Off to disable the test pattern and
view video from the selected source. Select one of the following options: Color Bar, Gray Ramp, SMPTE
Bar, HiLoTrak, Pluge, and Cross Hatch.
Note: If you have uploaded a logo to display on the output, you can also select the logo from this option.
Logo images must be 24-bit color bitmap files at least 36x36 pixels in size.
Blank Screen Use the left and right buttons to select the color of the blank screen on the output. Select either Black or
Blue. The default setting is Black.
Note: If you have uploaded a logo to display on the output, you can also select the logo from this option.
Logo images must be at least 36x36 pixels in size.
OSD Use the left and right buttons to toggle whether you want the OSD overlay to be turned on or off.
Select either Enabled or Disabled. The default setting is Disabled. When enabled, the input name and
resolution displays in a small box in the upper left-hand corner of the screen whenever you select a new
input source.
The location of the input name and resolution can be changed using the OSD Position option.
OSD Pos Use the left and right buttons to select the on-screen displays’ relative position so it is unobtrusive to
video. Select Top Left, Top Right, Bottom Left, or Bottom Right. The default setting is Top Left.
OSD Color Use the left and right buttons to select the background color for the on-screen display. Select Black,
White, Yellow, or Blue. The default setting is Black.
Source (Output Video Adjust):
Brightness Use the left and right buttons to alter the brightness level adjustment applied to the selected output.
Set the brightness level from 0-100. The default setting is 50.
Contrast Use the left and right buttons to alter the contrast level adjustment applied to the selected output.
Set the contrast level from 0-100. The default setting is 50.
H Size Use the left and right buttons to set the horizontal size of the image for the selected output.
Set the size from 25 to 800. The default setting is 100.
H Shift Use the left and right buttons to move the location of the video output from left to right.
Set the shift from -127 to 127. The default setting is 0.
V Size Use the left and right buttons to set the vertical size of the image for the selected output.
Set the size from 25 to 800. The default setting is 100.
V Shift Use the left and right buttons to move the location of the video output up and down.
Set the shift from -127 to 127. The default setting is 0.
Zoom Use the left and right buttons to set the zoom on the video output image. Adjusting the zoom also adjusts
the horizontal and vertical sizes of the video output.
Set the zoom from 25 to 800. The default setting is 100.
Freeze Use the left and right buttons to toggle whether you want the current image to freeze and remain on the
screen.
Select either
On or Off. The default setting is Off.
Revert to
Default
Use the left and right buttons to indicate that you want to return all video options to their default settings.
When the display indicates to "Press TAKE for YES", pressing the Take button reverts all configurable
output image adjustments to their default values.