Instruction manual

Wiring and Device Connections
28
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
The following table displays the supported video settings for each type of input connection compatible with the HDMI
INPUT connectors:
DXLink INPUTS
The DXLink INPUTS (RJ-45) connectors transport digital video, embedded audio, Ethernet, and bi-directional control
over twisted pair cable to DXLink devices or boards, including digitally trans-coded analog video signals. Both inputs
support HDCP. These connectors are not available on all DVX models. Consult the Digital Audio Ports table on page 27
for a list of DVX models that feature DXLink INPUTS connectors.
FIG. 36 displays the DXLINK INPUTS connectors on the DVX-3155HD-SP.
FIG. 36 DXLINK INPUTS
See the Important Twisted Pair Cabling Requirements and Recommendations section on page 30 for information about
cable requirements for these ports.
VIDEO OUTPUTS
The following sections provide details on the video outputs for the 315x and 21xx DVX models.
315x Video Outputs
The VIDEO OUTPUTS for the 315x DVX models include 2 different types of connectors:
4 HDMI Output connectors (1-4) each provide digital DVI video and HDMI audio and video output.
2 DXLink Twisted Pair outputs (1, 3) mirror HDMI outputs 1 and 3. They provide digital video, audio,
Ethernet, and bi-directional control over Category Cable to DXLink Receivers. See the Important Twisted
Pair Cabling Requirements and Recommendations section on page 30 for information about cable
requirements.
Note: On Video outputs 1 and 3, if you are using both DXLink and HDMI outputs, it is recommended that they have the
same native resolution. In this situation, the EDID from the HDMI display is used to determine the SmartScale
resolution and timing.
Supported Video Settings
Type Phase Shift Hue Saturation Contrast Brightness
DVI X X   
HDMI X X   