Instruction manual

Wiring and Device Connections
22
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Source devices require either balanced (differential) or unbalanced (single-ended) connections. FIG. 23 illustrates
options for wiring between sources and input connectors. More than one option can be used in the same system.
FIG. 23 Stereo 5-terminal wiring
FIG. 24 provides details for wiring from an audio input to a an unbalanced source device that has RCA connectors.
Positive and ground wires connect to the source. You also can use a CC-3.5ST5-RCA2F 2 RCA Female to 5-Pin Phoenix
Cable (FG10-003-20) for this type of connection.
FIG. 24 RCA Stereo audio source wiring
WARNING! Do not connect the negative terminals to the source connector. Doing so can cause damage to your device.
MIC INPUTS
Two 3.5mm 3-pin captive-wire MIC INPUT connectors (FIG. 25) allow up to two mono microphones to be connected to
the DVX. Each microphone input supports balanced and unbalanced audio. Each input supports up to 48V of phantom
power.
FIG. 25 displays the MIC INPUTS connectors.
FIG. 25 MIC INPUTS
Balanced wiring
Unbalanced wiring
DVX
source device
DVX
source device