Instruction manual

Enova 315x All-in-One Presentation Switchers
4
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
DVX-3150HD/3155HD/3156HD Specifications (Cont.)
SWITCH pushbutton: Press to access the Switch menu on the LCD display. Use the menu to choose to switch audio,
video or both from any input to any output.
TAKE pushbutton: While in the Switch menu, press to implement an audio/video switch.
VIDEO MENU
pushbutton:
Press to access the Video menu on the LCD display. There are two video menus (VIDEO
OUTPUT and VIDEO INPUT) and both are accessible by using this button. Multiple presses
cycle through the various VIDEO menus.
AUDIO MENU
pushbutton:
Press to access the Audio menu on the LCD display. There are three audio menus (AUDIO
OUTPUT, AUDIO INPUT, and MIC) and all are accessible by using this button. Multiple presses
cycle through the various AUDIO menus.
Navigational
pushbuttons:
4 directional buttons for navigating the options in the Switch, Video, Audio, and Status menus
(on the LCD display).
STATUS pushbutton: Press to access the STATUS menu on the LCD display on which you can view system status
and other system information.
EXIT pushbutton: Press to exit the current menu and return to the default menu page, Main Amp Output/Volume.
VIDEO MUTE
pushbutton:
Press to mute/un-mute (enable/disable) all video output displays.
Video Mute results in a blank screen on the output displays.
AUDIO MUTE
pushbutton:
Press to mute/un-mute all audio outputs.
Rear Panel Components:
RS-232/422/485
(PORT 1-6):
RS-232/422/485 Ports 1-6 provide serial control via DB9 (male) connectors.
See the RS232/422/485 Serial Port Connectors section on page 31 for more information.
RELAYS (PORT 8): 1 relay port (Port 8) provides Relay control via 8-pin 3.5 mm captive-wire connectors.
See the RELAYS section on page 32 for more information.
IR/SERIAL
(PORTS 9-16):
8 IR/Serial ports (Ports 9-16) provide IR/Serial control via 2-pin 3.5 mm captive-wire
connectors. See the IR/SERIAL section on page 33 for more information.
I/O (PORT 17): Port 17 provides an 8-channel binary I/O port for contact closure with each input being capable
of voltage sensing.
See the I/O section on page 32 for more information.
AUDIO INPUTS: 8 analog audio inputs:
• 4 female 1/8" stereo mini-phono jacks receive up to four unbalanced line-level audio inputs.
(There are only 2 jacks available on the DVX-3156HD.) See the AUDIO INPUTS section on
page 20 for more information.
• 4 3.5mm 5-pin captive-wire connector provides for fixed or variable, balanced or unbalanced
line-level audio inputs. See the AUDIO INPUTS section on page 21 for more information.
MIC INPUTS: 2 3.5mm 3-pin captive-wire connectors receive up to 2 mono microphones (balanced or
unbalanced audio and switchable Phantom Power). See the MIC INPUTS section on page 22
for more information.
AMP OUT: • 1 5mm 4-position captive wire connector provides amplified audio output with volume control
(-SP models only).
• Two 2-position captive wire connectors provide 70V or 100V mono amplified audio output (-T
models only).
See the AMP OUT section on page 23 for more information.
AUDIO OUTPUTS: 3 3.5mm 5-pin captive-wire connector provides for balanced or unbalanced, mono or stereo
line-level audio output. See the AUDIO OUTPUTS section on page 24 for more information.
S/PDIF OUTPUT: 1 Coaxial RCA connector provides digital S/PDIF audio output that can mirror any of the 4
analog audio outputs or the 4 HDMI outputs.
MULTI FORMAT
VIDEO INPUTS:
4 DVI-I input connectors provide analog and digital video inputs for up to four video sources.
(There are only 2 DVI-I connectors on the DVX-3156HD.)
Each MULTI FORMAT VIDEO INPUT connector supports VGA, S-Video, composite video,
component video, DVI, or HDMI video input. See the Available Pixel Display and Refresh
Rates section on page 121 for information on supported video formats and resolutions. See the
Cable Details and Pinout Information section on page 39 for information about wiring
conversion cables.