Instruction manual

Programming
110
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Video SEND_COMMANDs (Cont.)
?VIDIN_SATURATION Requests the saturation level setting of the specified video input port.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_SATURATION'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_SATURATION'"
Returns a COMMAND string of the form:
VIDIN_SATURATION-<value>
VIDIN_SATURATION Sets the saturation level setting of the specified video input port to <value>.
Syntax:
SEND_COMMAND <DEV>, "'VIDIN_SATURATION-<value>'"
Variables:
value = 0..100
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_SATURATION-50'"
Sets the saturation of video input port (#1 based on D:P:S) to 50.
?VIDIN_STATUS Requests the status of the specified video input port.
Syntax:
SEND_COMMAND <DEV>,"'?VIDIN_STATUS'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_STATUS'"
Returns a COMMAND string of the form:
VIDIN_STATUS-<status string> status string = NO SIGNAL,
UNKNOWN SIGNAL, or VALID SIGNAL
?VIDIN_VSHIFT Requests the vertical shift value of the specified RGB video input port.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_VSHIFT'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_VSHIFT'"
Returns a COMMAND string of the form:
VIDIN_VSHIFT-<value>
VIDIN_VSHIFT Sets the vertical shifting of the specified RGB video input port. to <value>.
Syntax:
SEND_COMMAND <DEV>, "'VIDIN_VSHIFT-<value>'"
Variables:
value = -10..10
Example:
SEND_COMMAND "'VIDIN_VSHIFT-2'"
Sets the vertical shifting of RGB video input port (#1 based on D:P:S) to 2 (shift upward).
SEND_COMMAND "'VIDIN_VSHIFT--3'"
Sets the vertical shifting of RGB video input port (#1 based on D:P:S) to -3 (shift
downward).
?VIDOUT_ASPECT_RATIO Requests the aspect ratio of the specified video output port.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_ASPECT_RATIO'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'?VIDOUT_ASPECT_RATIO'"
Returns a COMMAND string of the form:
VIDOUT_ASPECT_RATIO-<ratio>
See the VIDOUT_ASPECT_RATIO command (page 111) for the list of aspect ratios.