Instruction manual

Programming
99
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio SEND_COMMANDs (Cont.)
?AUDOUT_EQ_Q Requests the quality factor (Q) on a specific equalizer band on the specified
audio output port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_EQ_Q-<band>'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'?AUDOUT_EQ_Q-1'"
Returns a COMMAND string of the form:
AUDOUT_EQ_Q-<band>,<factor>
AUDOUT_EQ_Q Sets the quality factor (Q) on a specific equalizer band on the specified audio
output port.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_EQ_Q-<band>=<factor>'"
Variables:
band = 1-10 if on the audio output port.
factor = range depends on filter type (AUDOUT_EQ_FT)
Bell: range is 0.1 - 20.0
Band Pass: range is 0.1 - 20.0
Band Stop: range is 0.1 - 20.0
High Pass: range is 0.5 - 1.4
Low Pass: range is 0.5 - 1.4
Treble Shelf: range is 0.5 - 1.0
Bass Shelf: range is 0.5 - 1.0
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'AUDOUT_EQ_Q-1=8'"
Sets the Q on band #1 of the audio port 1 equalizer to 8.
?AUDOUT_MAXVOL Requests the current maximum volume for the specified audio port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_MAXVOL'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'?AUDOUT_MAXVOL'"
Returns a COMMAND string of the form:
AUDOUT_MAXVOL-<maximum>
AUDOUT_MAXVOL Sets the maximum volume for the specified audio port.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_MAXVOL-<maximum>'"
Variable:
maximum = 0 to 100 in percent
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'AUDOUT_MAXVOL-75'"
Sets the maximum for the audio output port (#1 based on D:P:S) to 75%.
?AUDOUT_MINVOL Requests the current minimum volume for the specified audio port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_MINVOL'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'?AUDOUT_MINVOL'"
Returns a COMMAND string of the form:
AUDOUT_MINVOL-<minimum>