Instruction manual

Programming
98
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio SEND_COMMANDs (Cont.)
AUDOUT_EQ_FT Sets the filter type on a specific equalizer band on the specified audio output
port.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_EQ_FT-<band>=<filter type>'"
Variables:
band = 1..10 if on the audio output port.
filter type = Bell, Band Pass, Band Stop, High Pass, Low Pass, Treble Shelf,
and Bass Shelf
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'AUDOUT_EQ_FT-1=Low Pass'"
Sets the filter type on band #1 of audio port 1 equalizer to Low Pass.
?AUDOUT_EQ_GAIN Requests the gain on a specific equalizer band on the specified audio output
port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_EQ_GAIN-<band>'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'?AUDOUT_EQ_GAIN-1'"
Returns a COMMAND string of the form:
AUDOUT_EQ_GAIN-<band>,<value>
AUDOUT_EQ_GAIN Sets the gain on a specific equalizer band on the specified audio output port.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_EQ_GAIN-<band>,<value>'"
Variables:
band = 1..10 if on the audio output port.
value = -12..12. The units are in dB.
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'AUDOUT_EQ_GAIN-1=8'"
Sets the gain on band #1 of audio port 1 equalizer to 8.
SEND_COMMAND AUDIO_OUTPUT_2,"'AUDOUT_EQ_GAIN-5=-10'"
Sets the gain on band #5 of audio port 2 equalizer to -10.
?AUDOUT_EQ_MODE Request the current mode of the equalizer for the specified audio port.
Syntax:
SEND_COMMAND <DEV>, "?'AUDOUT_EQ_MODE'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'?AUDOUT_EQ_MODE'"
Returns a COMMAND string of the form:
AUDOUT_EQ_MODE-<mode>
AUDOUT_EQ_MODE Sets the mode for the equalizer for the specified audio port.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_EQ_MODE-<mode>'"
Variables:
mode = off, voice, music, movie
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'AUDOUT_EQ_MODE-movie'"
Sets the equalizer to favor the sounds of a movie for the audio output port
(#1 based on D:P:S).