Instruction manual

Programming
94
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio SEND_COMMANDs (Cont.)
AUDMIC_LIMITER_THRESH Sets the limiter threshold for the specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_LIMITER_THRESH-<thresh>'"
Variable:
thresh = 0 to -60
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_LIMITER_THRESH--20'"
Sets the limiter threshold for the microphone port (#1 based on the D:P:S) to
-20.
?AUDMIC_ON Requests the status of the specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_ON'"
Example:
SEND_COMMAND MICROPHONE_1, "'?AUDMIC_ON'"
Returns a COMMAND string of the form:
AUDMIC_ON-<setting>
AUDMIC_ON Enables or disables the specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_ON-<setting>'"
Variable:
setting = on, off
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_ON-off'"
Disables the microphone port (#1 based on the D:P:S).
?AUDMIC_PHANTOM_PWR Requests the phantom power setting for the specified microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_PHANTOM_PWR'"
Example:
SEND_COMMAND MICROPHONE_1, "'?AUDMIC_PHANTOM_PWR'"
Returns a COMMAND string of the form:
AUDMIC_PHANTOM_PWR-<result>.
AUDMIC_PHANTOM_PWR Enables or disables phantom power for the specified microphone port.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_PHANTOM_PWR-<setting>'"
Variable:
setting = on, off
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_PHANTOM_PWR-on'"
Allows phantom power for the microphone port (#1 based on D:P:S).
?AUDMIC_PREAMP_GAIN Requests the pre-amplifier gain setting on the specified microphone.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_PREAMP_GAIN'"
Example:
SEND_COMMAND MIC_1,"'?AUDMIC_PREAMP_GAIN'"
Returns a COMMAND string of the form:
AUDMIC_PREAMP_GAIN-<gain>